- Shop Hours: Mon-Fri : 8.00 AM - 4.30 PM | Service Hours: 24/7
Call Us
(281) 356-3906
(281) 356-3906
Your Trusted Source for Heavy-Duty Hydraulic Press Services in Houston for Crane Wheels, Bearings, Gears, and Custom Industrial Assemblies
At Osborn Technical Services, our hydraulic press services in Houston are built to meet the needs of industrial clients who demand strength, precision, and reliability. With decades of experience serving the crane industry, chemical plants, and agricultural clients across Texas and Louisiana, we’ve designed our press capabilities to handle everything from gear assemblies to bearing extractions with zero margin for error.
Most general machine shops don’t have the equipment, training, or press configurations required for advanced press work. That’s why customers from across the region send their toughest projects to Osborn. We know how your parts are designed to fit—and more importantly, how to take them apart and put them back together with complete accuracy.
Whether you need to remove a stubborn bearing from a crane shaft or press a gear into position with tight tolerances, we’re ready to support your operation with expert service, fast turnaround, and unmatched reliability.
Our press work is trusted by chemical plants, agricultural processing sites, and crane manufacturers across the region. We commonly handle:
Need to remove a stuck bearing or reassemble a large gear-driven unit? We do this every day.
Unlike typical machine shops, Osborn Technical Services is purpose-built to handle the heavy-duty demands of the crane and manufacturing industries. We provide the technical experience, tooling, and press configurations that other shops can’t match.
In-House Expertise
Our team understands the real-world demands of high-load machinery. We’re not just pressing parts into place—we’re engineering fit, alignment, and performance. With deep experience in assembling crane wheels, gears, shafts, and pinions, we ensure your parts meet strict dimensional and load-bearing requirements.
Large-Capacity Presses
Not all shops have the right equipment to complete complex press work. We operate a full range of hydraulic presses that allow us to service both large and small assemblies:
200-ton horizontal press: Capable of pressing items up to 5’ wide and over 20’ long. Ideal for crane wheels and extended shaft arrangements.
100-ton vertical press: Handles components up to 34” wide x 54”+ in height.
30-ton “C” frame vertical press: Perfect for precise bearing installation in 22” wide x 24” configurations.
20-ton vertical press: Flexible for smaller assemblies, up to 24” wide x 48”+.
Turnaround That Keeps You Moving
Downtime is expensive. That’s why we’ve designed our hydraulic press services in Houston for speed and efficiency. With in-house equipment and expertise, we eliminate unnecessary delays and provide faster lead times than shops that need to outsource or improvise.
Many press jobs go hand-in-hand with custom machining or part repair. Fortunately, our Houston machine shop is fully equipped to handle:
We don’t just press parts into place—we also repair, modify, and refit them using our full range of in-house machining tools.
From petrochemical facilities in Houston to agricultural loading stations in Baton Rouge, our clients depend on us for press services that minimize risk and maximize uptime. Our expertise includes support for:
No matter the application, we apply the same level of engineering precision and attention to detail.
50+ years of leadership in crane and machine system support
All services performed in-house at our Pinehurst, TX facility
Designed for custom, not cookie-cutter applications
Fully compliant with ASME, OSHA, ABS, CMAA regulations
Trusted by Fortune 500 clients across industrial sectors
1. Assessment & Consultation
We inspect your parts and identify optimal pressing strategies based on material, fitment, and load conditions.
2. Setup & Tooling
We configure the correct press and install any required jigs, fixtures, or measurement tools.
3. Precision Pressing
Our experienced technicians perform the press work with precision monitoring, maintaining alignment and pressure tolerances.
4. Inspection & Verification
We conduct final measurements, alignment checks, and part integrity tests before delivery or reassembly.
Most competitors can’t match our combination of hydraulic press work, custom fabrication, and field-proven experience. Here’s how we consistently deliver more value:
Whether you’re pressing a single gear or reassembling an entire crane wheel system, Osborn Technical Services is your go-to partner.
While we’re based in Pinehurst, TX, Osborn Technical Services proudly serves industrial clients throughout the greater Houston area, including:
Houston
Pasadena
Deer Park
Baytown
Conroe
The Woodlands
Sugar Land
Katy
Beaumont
Galveston
And throughout Texas, Oklahoma, & Louisiana
Need on-site assessment? We’ll come to you.
We specialize in wheels, shafts, bearings, and gears—especially for overhead crane systems—but can handle many industrial components.
Yes. Our presses can disassemble tightly fitted assemblies without damage to the mating parts.
Typical press work is completed within 2–5 days depending on part complexity and scheduling. Rush jobs may be available.
Absolutely. We can press, machine, harden, and reassemble most parts—all in-house at our Houston-area facility.
Yes. All work follows ASME, OSHA, CMAA, and ABS compliance standards when applicable.
If your project requires precision press work, don’t settle for a generic shop. Osborn Technical Services has the equipment, experience, and technical insight you can’t find elsewhere.
📞 Call us at (281) 356-3906
📍 Visit us at: 31925 Decker Industrial Circle, Pinehurst, TX 77362
📩 Or fill out our contact form to get started.
We’re ready to help you press, assemble, and deliver results with confidence.